Devilbiss Oxygen Concentrator – 525DS

Description

Devilbiss Oxygen Concentrator ( 525DS ) 24.5″H x 13 Features:

• Readily accessible patient controls and protected cannula fitting
• Noticeably quiet operation – 15% typical sound quality improvement
• Recessed humidifier nook prevents damage
• Lockable flow meter
• Easy to assemble and disassemble two-piece cabinet for ease of maintenance
• Accommodates up to a 50-foot (15.3 meters)
• Convenient top and side handles for easy transport
• Translucent back of Intake Filter allows the technician to quickly determine if the filter is dirty
• Interfaces with DeVilbiss Smart Track Concentrator Management System which:
• Performs in-depth concentrator check
• Inputs patient data and downloads critical equipment information
• Robust design for improved durability
• Unit tested in high temperature and high humidity for extended periods of time
• helps provide supplemental low flow oxygen therapy to the patients suffering from COPD, lung disorders and cardiovascular disease. Oxygen concentrator is used in homes, nursing homes, home type environments, patient care facilities, etc.
  

  How To Operate Devilbiss Oxygen Concentrator?

• Oxygen concentrators are the most reliable, efficient, and convenient source of supplemental oxygen available today. The oxygen concentrator is electrically operated. The unit separates oxygen from room air which allows high-purity supplemental oxygen to be delivered to you through the oxygen outlet. Although the concentrator filters the oxygen in a room, it will not affect the normal amount of oxygen in your room.Patented DeVilbiss Turn-Down Technology:
  • Automatically turns down its flow cycle below 2-1/2 lpm, resulting in a 35% reduction in system pressure to reduce stress on compressor bearings and internal fittings
  • Energy-efficient design reduces power consumption by 15% or more compared with competitive designs to save patients an average of $100 in electricity costs annually
  • Minimizes wear on internal components thereby extending the life of concentrator

  Operating Instructions of Devilbiss Oxygen Concentrator – 525DS – 24.5″H x 13:

  1. Press the power switch to the ?On? position. When the unit is turned ?On,? all four lights (Power, Service Required, Low Oxygen, and Normal Oxygen) on the front panel will illuminate briefly and audible signal will briefly alarm. After a few seconds, only the Power and Normal Oxygen lights will remain lit.
  2. Check the flow meter to make sure that the flow meter ball is centered on the line next to the prescribed number of your flow rate. If the flow meter knob is turned clockwise, the flow decreases (and eventually will shut off the oxygen flow). If the knob is turned counterclockwise, the flow increases.
  3. DeVilbiss concentrator is now ready for use, properly position the cannula or mask. Allow 20 minutes for oxygen concentrator to reach stated performance.

  How To Clean Oxygen Concentrator?

  1. Dispose of all accessory components that are not suitable for reuse, i.e., particularly the oxygen tubing, the nasal cannula/mask, oxygen outlet connector and humidifier bottle.
  2. Concentrator must be disconnected from the power supply for this step. Open the concentrator and remove all dust deposits inside the cabinet with an appropriate vacuum cleaner.
  3. Clean and disinfect all parts of the cabinet inside and outside and the power cord with a suitable disinfecting agent, e.g., Aldahol, Cidex OPA or Peract.
  4. Check the cord, the plug on the back of the device, the power switch, the fuse holder and the indicator light for possible damage.
  5. Replace all damaged or worn components.
  6. Replace the cabinet air filter on the back of the device.
  7. Check the oxygen concentration. If the device is within specifications, the extended life intake bacteria filter does not need to be replaced between patients.
• Warnings:
  • For your safety, the oxygen concentrator must be used according to the prescription determined by your physician
  • Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide
  • This device contains electrical and/or electronic equipment
  • Follow local governing ordinances and recycling plans regarding disposal of device components
  • Installation of 515LF-607 low output flow meter package will cause the low flow alarm to not work

  Oxygen Concentrator Specifications:

• Particulars	Dimensions
  Outlet Pressure	8.5 PSIG (58.6 KPa)
  Oxygen Purity	93% at 1 to 5 lpm (+/- 3%)
  Power Consumption	310 Watts average (275 Watts @ 2.5lpm and below)
  Product Dimensions	24.5?H x 13.5?W x 12?D (62.2cm x 34.2cm x 30.4cm)
  Product Weight	36lbs (16.3kg)
  Alarms	Audible and visual High/low pressure, low flow, low oxygen, power fail, Oxygen Sensing Device
  Sound Level	48 dbA
  Pressure Relief Valve	40 psig?5psig (276 kPa?34.5 kPa)
  Electrical Rating	115V, 60Hz, 3.3amp
  Storage Conditions	-40?C to 70?C, humidity range of 10% to 100%, including condensation
  Delivery Rate (Lower delivery rates available for low flow applications)	0.5lpm to 5lpm
  Maximum Recommended Flow (nominal outlet pressures of zero and 7kPa)	5lpm
  Operating Voltage Range	97-127V, 60Hz
  Oxygen Percentage	1-5 lpm=93%?3%

  Oxygen Concentrator Warranty

  THIS ITEM REQUIRES A PRESCRIPTION

  If you do not have a prescription at time of purchase, a sales associate will reach out to you prior to delivery.